Visible Spectrophometer

A visible spectrophotometer is a scientific instrument used to measure the absorbance or transmittance of light in the visible range of the electromagnetic spectrum. It is commonly used in various fields such as chemistry, biochemistry, physics, and environmental science. \n \nDescription \n \nDetailed Information \nSpectrumlab 23A spectrophotometer is designed for the purpose of education and general analysis in low cost,It can use Φ10-Φ16mm tube or rectangular cuvette in sample department,high reliable and operate easily. It can be used for environmental protection,education etc , qualitative analysis & quantitative analysis can be done. \n• The instrument has variable wavelength and four scales: transmittance absorbency concentration and factor. \n• Using universal test tubes or cuvette to make measure directly. \n• The instrument is micro computerized and easy in operation. \n• The 12nm spectral slit width provides the sensitivity required for almost any application. \n• One solid-state silicon detector covers entire wavelength range, eliminating the need to change detectors between different analyses. \n• It is easy to replace the unit of instrument specially the Unit of the Pre-adjusted light source, and make it convenient to maintain. \n• Free adjusting for filter exchange. \n \nHow to select the test tube \nGenerally the round test tube is not for optic purpose unless it is pre-checked strictly. \nWe can select it as follow: \n• Check size. (Recommended size is 12+0.4×75 mm) \n• Check the surface of tube. (It should be no bubbles, no scabs, no thread like things.) \n• Warming instrument and set the wavelength at 360 nm. \n• Pour some pure water into tube and insert it to the test tube well in sample apartment. Check it. Then put some mark on the tube opposite the white mark at the instrument. \n• Put the other test tube into instrument one by one and get the readout for everyone and put mark at everyone. We can divide them in many groups. In each group the differential of readout for every tub is less than ± 0.02A. \n• Then we can use tubes in same group for blank, sample, and standard solution needn’t check the tube every time. \n \nAllschoolabs may send you another brand for this Visible Spectrophometer. Don't worry, the specification will be the exact same as in the image attached here. For chemicals and reagents, we distribute brands such as Fisher, Merck, Sigma Aldrich, CDH, BDH, Loba Chemie, JHD, Qualikem, and Klincent. Our glassware is borosilicates. They include the following: Burtech, S. Pyrex, Simax, Jtech, Jsil, England Pyrex, and 3.3 Boro. Type A glasses are not displayed on our shop page, however, they are in stock. \n